PRODUCTION FLAT PRESSES
CLAM  SHELL  PRESS

An economical yet solidly constructed press for applying sublimation, color laser copier and plastisol transfers. The even heat and pressure distribution make it an ideal press for imprinting a wide variety of substrates. The single motion clam shell design makes it faster than swing-away presses, but for imprinting items over 1/2" thick, a swing-away press would be a better choice.
Features:
- 15" x 15" or 16" x 20" Heat Platen

- Auto-start timer

- Adjustable height up to 1/2" thick

- Adjustable temperature control up to 425 degrees (F)

- Acurate temerature gauge

- Silicone Pad pressing surface

Price:
$695.00 for 15" x 15", $895.00 for 16" x 20" (add $50 for 220 volts)
18"x18" Teflon Sheets - $26 per set of two (items to be imprinted should be sandwitched between two sheets of protective teflon)
DIGITAL  COMBO

The Digital Combo is a multipurpose swing-away heat press. This fully digital 14" x 16" press has interchangeable attachments for imprinting caps, plates, mugs (only 1/2 side), paper cubes, as well as the typical T-shirts and plaques. SuperCoil Microwinding technology deliver unsurpassed temperature uniformity across the heating platen. Ideal for extra thick items up to 4" thick.

Features:
- 14" x 16" Swing-Away Heat Platen

- SuperCoil Microwinding heater

- Digital and programmable controller

- Interchangeable platens

- Digital pressure and height gauge

- Acurate temerature gauge

- Silicone Pad pressing surface

Price:
Basic Press - $1195.00, Cap Attachment - $275.00, Plate Attachment - $225.0,
1/2 Mug Attachment - $300.00, Cube Attachment - $200.00
Twin Suttle Dual Table Attachment - $575.00
Teflon Bottom wrap with elastic corners - $30.00, 18"x18" Teflon Sheet - $13
DK20S DIGITLAL SWINGER

The DK20S is the most popular swing-away heat press on the market for good reason; Heavy-duty construction with 3/4" thick platen; SuperCoil-Microwinding heater technology for superior heat distribution; Fully digital temperature controller with programmable presets; Auto-start digital timer and many other features make this the ideal production press for critical heating applications. Ideal for sublimation, color copier and plastisol transfer applications.

Features:
- 16 x 20" Swing-Away Heat Platen

- Teflon coated 3/4" thick heat platen

- SuperCoil Microwinding heater for even heat distribution

- Digital and programmable controller

- Digital pressure and height gauge

- Automatic digital timer

- Accomodates materials up to 1" thick

- Interchangeable tables including a shuttle upgrade (see description below)

Price:
Basic Press - $ 1350.00, Twin Shuttle Add on - $650.00 (see descr. below)
Teflon Bottom Wrap with elastic corners - $30.00, 18"x18" Teflon Sheet - $13
DK20S DIGITAL SWINGER TWIN STATION UPGRADE

By almost doubling the productivity per single operator, the DK20S Twin Station Shuttle upgrade is an unbeatable value. Adding a twin shuttle to your DK20S allows an operator to unload and load materials while a cycle is pressing. Production is maximized with no additional labor cost.

Same features as the DK20S (see above) plus two lower 16 x 20 platens on a shutle system:

Price:
Shuttle upgrade for the DK20S press - Basic Press - $ 650.00
Teflon Bottom Wrap with elastic corners - $30.00, 18"x18" Teflon Sheet - $13
DK20SP DIGITAL AUTOMATIC AIR SWINGER

The DK20SP is an air-operated, automatic 16" x 20" swing-away heat press with a state-of-the-art control system and heavy-duty solid steel welded framework. The smooth automatic pressing and push-button activation provides a productive fatigue free operation. The heat platen uses SuperCoil-Microwinding technology providing extremely even heat, fast recovery and fast heat up times. In a constant-use heat press environment where a manual press just isn't enough, the DK20SP offers an affordable and professional automation solution.

Features:
- Automatic air operated pressing

- PSI pressure control gauge

- Fully digital temperature control

- Programmable presets

- Automatic digital timer

- SuperCoil-microwinding for even heat distribution

- Temerature accuracy + - 2 degrees (F)

- Solid steel welded framework

- 3/4" thick teflon coated thick heat platen

Price:
Basic Press - $2250
Teflon Bottom Wrap with elastic corners - $30.00, 18"x18" Teflon Sheet - $13